N/ERA WRAP PANT
Scroll to explore the construction engineering behind a zero-compromise wrap flare in cotton-linen poplin. Every seam placement, closure detail and interior finish specified to luxury ready-to-wear standards.
Structure Without Stiffness
The brief demanded a fitted hip block dropping into a crisp architectural flare — in natural-fibre poplin, not synthetic. Linen-cotton wants to crumple and bag. The wrap closure had to hold without visible topstitching, and the hip-to-flare transition had to read seamless with zero bagging at the knee.
Front Wrap Construction
The front wrap uses a deep self-fabric facing, block-fused to hold the diagonal edge without collapsing. Strictly understitched to the interior — the centre-front edge rolls inward with zero visible topstitching on the face. A 3mm waxed cotton micro-cord threads through 5mm gunmetal eyelets at the wrap point.
Encased Elastic Casing
The back waistband houses a 20mm non-roll woven elastic inside a 50mm casing, anchored at both side seams with a horizontal channel-stitch through the centre to eliminate twisting. Controlled stretch at the back while the front wrap stays architecturally rigid.
Invisible On-Seam Pockets
Pocket openings are the critical fail point. 5mm clear Mobilon tape is sewn into the opening seam allowance before bag attachment, locking the bias grain against gaping. Bags are cut in 100% Bemberg cupro, enclosed with ¼" French seams. Overlocking is strictly prohibited.
Invisible Side Zipper
Entry is via a #3 YKK invisible zipper at the wearer's left side seam, positioned between the top of the waistband and the start of the invisible side pocket. Entirely concealed within the seam allowance, keeping a clean vertical line from waist to hem.
Cotton-Linen Poplin
High-density warp construction with a crisp architectural substrate. Face and back matte — no sheen permitted. Heavy enough to anchor the flare without billowing, light enough to move. Zero-tension spreading with a mandatory 24-hour rest before cutting.
Baby Hem & Thread Spec
The hem is a ⅛" double-fold baby hem in Tex 25 fine poly-silk thread — the only location it appears. All structural seams use Tex 30 core-spun polyester. Microtex needles throughout to protect the tightly woven poplin.
Ballet Gusset Construction
The companion bodysuit is built around a ballet-style gusset cut on the bias and set with a three-panel crotch junction — no seam crossing at the centre. Bar-tacked at the load points so the leg line stays clean through full range of movement.
Drop-Shoulder Line
A drop-shoulder armhole extends the yoke past the deltoid, softening the silhouette without collapsing it. The armhole edge is bound in self-fabric, understitched flat so it lies against the arm with zero rolling.
Neckline & Closure
Neckline and leg openings share one coverstitched twin-needle finish at 6mm, holding recovery through repeated wear. Closure at the gusset is a three-position hook tape so fit adjusts without altering the body block.
Production Spec Issued
Wrap closure holds without topstitching. The flare breaks cleanly below the knee. Mobilon-locked pockets sit flush, French-seamed cupro bags remove interior friction, and the gunmetal eyelet cord reads hardware-forward without compromising the silhouette.
Specs
- Style
- NR-SS26-WLP01
- Fabric
- Cotton-Linen Blend Poplin, 165 gsm
- Composition
- 70% Cotton / 30% Linen
- Lining
- 100% Bemberg Cupro (Pocket Bags)
- Closure
- #3 YKK Invisible Zip + Waxed Cord / Gunmetal Eyelet
- Construction
- Block-Fused Wrap, Encased Elastic, French-Seamed Bags
- Care
- Dry Clean Only
- Status
- Production Spec Issued
Ready to Build?
Start with our intake questionnaire. Tell us about your project and we'll scope the technical approach.